AI Condition Pre-Grade: How a Scan Flags What Graders Look For

Updated · 2 min read

Quick answer

The AI condition pre-grade in Digital AI Grading scans a trading card with your phone camera and flags the issues graders look at: centering, corner wear, whitening, edge damage and surface imperfections. It gives you an estimate to act on before you pay a grading fee. It is a pre-screen, not an official grade.

You've got a stack of twenty cards you think are clean and a grading budget for five. Every one looked perfect in the binder. You can spend an evening under a lamp with a loupe, or you can find out which five deserve that evening first.

What the scan looks for

Grading companies judge four things on the physical card: centering, corners, edges and surface. The pre-grade checks the visible signs of each and shows a sub-grade for every area next to the overall estimate, so you can see where a card is likely to lose points.

Condition areas checked by the scan
AreaWhat it flagsWhy it matters
CenteringUneven left/right or top/bottom bordersFixed at the factory; careful handling can't improve it
CornersRounding, softness and corner wearA single soft corner can cap a grade
EdgesWhitening, chipping and edge damageEspecially visible on dark-bordered card backs
SurfaceScratches, print lines and surface imperfectionsHardest to see by eye; shows at an angle under light

When it saves you money

Sorting a stack down to a submission

Scan the whole pile and set aside anything with a flagged corner or obvious whitening. You spend your careful inspection time, and your fees, only on cards that survive the first pass.

Checking a fresh pull before it goes in a sleeve

A modern pull can carry factory print lines or edge chipping straight out of the pack. A quick scan tells you whether it is a grading candidate or a binder card, before you get attached to a number.

Buying a raw card

Scanning a card in hand at a show gives you a second opinion on condition before you pay a near-mint price for it.

What a scan can't see

A camera sees what the light shows it. A shallow dent, a faint print line or a scratch that only appears when the card is tilted can be missed in a single photo, and glare from a sleeve can look like a surface mark that is not there.

That is why the pre-grade is an estimate to guide your own inspection, not a replacement for it. PSA, Beckett, CGC and SGC inspect the physical card under their own standards and make their own decision. Use the pre-grading checklist for the physical inspection and the centering guide for measuring both sides. Treat a flagged area as a place to look closely, and treat a clean scan as a reason to inspect further, not as a guarantee.

Get a better scan

When comparing results from different apps, use the same cards and lighting. The grading app guide explains what else to check before committing to a workflow.

  • Take the card out of the sleeve if you can do it safely
  • Use bright, even light and avoid reflections on holo areas
  • Fill the frame with the card, phone parallel to the table
  • Scan both sides: whitening is often worse on the back

Frequently asked questions

Is the AI pre-grade an official grade?
No. It is an estimate based on a photo. Only the grading company that receives your physical card can assign an official grade.
Which grading companies is it useful for?
Any grader that judges centering, corners, edges and surface, including PSA, Beckett (BGS), CGC and SGC. Each company applies its own standards.
Which cards can I scan?
Pokémon, One Piece, Yu-Gi-Oh!, Magic: The Gathering, Dragon Ball Super, Disney Lorcana, Digimon, Star Wars Unlimited and sports cards, among others.
Can the scan tell if a card is fake?
No. A scan helps identify the card and its visible condition, but it cannot certify authenticity. Compare against a known genuine copy or use professional authentication for valuable cards.

Know before you submit.
Not after.

Digital AI Grading checks condition, centering and raw vs graded value from a scan of your card. Free to download on iPhone.